2JZduino PCBs

I’m having my first custom PCB made for 2JZduino, using v0.3 of the code (which isn’t available as of this writing). It will support intercepting the IGT igniter signals to control ignition timing (instead of the v0.2 method which controlled ignition by intercepting the crank timing signal). The wiring inside my project box is getting messy enough that I don’t have much trust left in it to be reliable. So these are the first steps toward eventually releasing the Eagle files and a Mouser order BOM for anyone that wants to build one of these for themselves.

The board is being made through http://www.dorkbotpdx.org.

The custom board allows for a much cleaner assembly and packaging job. Below are a couple of solid model images of 2JZduino (semi) pupulated and packaged with an Arduino Mega.